VLMCSD.INI(5)                KMS Activation Manual               VLMCSD.INI(5)



NAME
       vlmcsd.ini - vlmcsd KMS emulator configuration file


SYNOPSIS
       vlmcsd.ini


DESCRIPTION
       vlmcsd.ini  (or  simply  called the "ini file") is a configuration file
       for vlmcsd(8). By default vlmcsd does not use a configuration file.  It
       is completely optional and for advanced users only. You must use the -i
       option on the vlmcsd command line to use  an  ini  file.  There  is  no
       default name or default location for the ini file.

       Everything,  that can be configured in the ini file, may also be speci‐
       fied on the command line. Any configuration  option  specified  on  the
       command line takes precedence over the respective configuration line in
       the ini file.

       Benefits of a configuration file

       While you can use the configuration file to simply modify  the  default
       behavior  of vlmcsd, it can also be used to change the configuration of
       vlmcsd after you sent a HUP signal(7). Whenever you  send  SIGHUP,  the
       configuration  file  will  be  re-read. Any changes you made to the ini
       file will be reflected after vlmcsd received the hangup signal.

       Differences between command line and configuration file

       If you specify an illegal option or  option  argument  on  the  command
       line,  vlmcsd displays help and exits. If you specify an incorrect key‐
       word or argument in the ini file, vlmcsd displays a warning  with  some
       information,  ignores the respective line and continues. This is inten‐
       tional and prevents vlmcsd from aborting after a SIGHUP if the configu‐
       ration was modified incorrectly.


SYNTAX
       vlmcsd.ini  is  a  UTF-8  encoded text file with each line being in the
       format keyword = argument. The keyword is not case-sensitive. The argu‐
       ment  is  treated  literally.  It  is  neither  required nor allowed to
       enclose the argument in any form of quote characters except when  quote
       characters  are  part of the argument itself. Whitespace characters are
       ignored only

       - at the beginning of a line
       - between the keyword and '='
       - between '=' and the argument

       Lines, that start with '#' or ';' are treated as comments. Empty  lines
       are  ignored  as well. If a keyword is repeated in another line, vlmcsd
       will use the argument of the last occurence of the keyword.  An  excep‐
       tion  to  this  is  the  Listen keyword which can be specified multiple
       times and causes vlmcsd to listen on more than one  IP  address  and/or
       port.

       Some  arguments  are  binary  arguments  that need to be either TRUE or
       FALSE. You can use "Yes", "On" or "1" as an alias for  TRUE  and  "No",
       "Off"  or "0" as an alias for FALSE. Binary arguments are case-insensi‐
       tive.


KEYWORDS
       The following keywords are defined (not all keywords may  be  available
       depending  on  the operating system and the options used when vlmcsd(8)
       was compiled):


       Listen This defines on what combinations of IP addresses and ports vlm‐
              csd  should  listen. Listen can be specified more than once. The
              argument has the form ipaddress[:port]. If you  omit  the  port,
              the  default  port  of  1688  is used. If the ipaddress contains
              colons and a port is used, you must  enclose  the  ipaddress  in
              brackets. The default is to listen to 0.0.0.0:1688 and [::]:1688
              which means listen to all IPv4 and all IPv6 addresses.  See  the
              -L  option  in  vlmcsd(8) for more info about the syntax. If you
              use -L or -P on the command line, all Listen keywords in the ini
              file  will be ignored. The Listen keyword cannot be used if vlm‐
              csd has been compiled to use Microsoft RPC (Windows  and  Cygwin
              only) or simple sockets.

              Examples:

              Listen = 192.168.1.123:1688
              Listen = 0.0.0.0:1234
              Listen = [fe80::1721:12ff:fe81:d36b%eth0]:1688


       Port   Can only be used if vlmcsd has been compiled to use simple sock‐
              ets or on Windows and Cygwin if vlmcsd(8) has been  compiled  to
              use Microsoft RPC. Otherwise you must use Listen instead. Causes
              vlmcsd to listen on that port instead of 1688.


       FreeBind
              Can be TRUE or FALSE. If TRUE, you can use  the  Listen  keyword
              with IP addresses that are currently not defined on your system.
              vlmcsd(8) will start listening on these IP addresses as soon  as
              they  become  available.  This  keyword  is only available under
              Linux and FreeBSD because no other OS  currently  supports  that
              feature.  FreeBSD  supports  this only for IPv4 and requires the
              PRIV_NETINET_BINDANY privilege which  is  normally  assigned  to
              proccesses of the root user.


       PublicIPProtectionLevel
              Set  the level of protection against KMS activations from public
              IP addresses.

              0 = No protection (default)
              1 = Listen on private IP addresses only (plus those specified by
              one or more Listen statements)
              2 = Disconnect clients with public IP addresses without activat‐
              ing
              3 = Combines 1 and 2

              For details on public IP protection levels see vlmcsd(8) command
              line option -o.


       UseNDR64
              Can  be  TRUE  or  FALSE.  Specifies whether you want to use the
              NDR64 transfer syntax. See options -n0 and -n1 in vlmcsd(8). The
              default is TRUE.


       UseBTFN
              Can  be  TRUE  or  FALSE. Specifies whether you want to use bind
              time feature negotiation in RPC. See options -b0 and -b1 in vlm‐
              csd(8). The default is TRUE.


       RandomizationLevel
              The  argument must 0, 1 or 2. This specifies the ePID randomiza‐
              tion level. See options -r0,  -r1  and  -r2  in  vlmcsd(8).  The
              default  randomization  level is 1. A RandomizationLevel of 2 is
              not recommended and should be treated as a debugging level.


       LCID   Use a specific culture id (LCID) even if the ePID is randomized.
              The  argument  must  be  a number between 1 and 32767. While any
              number in that range is valid, you should use an offcial LCID. A
              list  of  assigned  LCIDs  can  be  found  at http://msdn.micro‐
              soft.com/en-us/goglobal/bb964664.aspx. On the command  line  you
              control this setting with option -C.


       MaxWorkers
              The argument specifies the maximum number of worker processes or
              threads that will be used to serve activation  requests  concur‐
              rently.  This  is the same as specifying -m on the command line.
              Minimum is 1. The maximum is platform specific and is  at  least
              32767  but  is likely to be greater on most systems. The default
              is no limit.


       ConnectionTimeout
              Used to control when the vlmcsd  disconnects  idle  TPC  connec‐
              tions. The default is 30 seconds. This is the same setting as -t
              on the command line.


       DisconnectClientsImmediately
              Set this to TRUE to disconnect a client after it got an  activa‐
              tion  response  regardless whether a timeout has occured or not.
              The default is FALSE.  Setting  this  to  TRUE  is  non-standard
              behavior.  Use only if you are experiencing DoS or DDoS attacks.
              On the command line you control this behavior  with  options  -d
              and -k.


       PidFile
              Write  a  pid  file.  The argument is the full pathname of a pid
              file. The pid  file  contains  is  single  line  containing  the
              process  id  of  the  vlmcsd  process.  It  can  be used to stop
              (SIGTERM) or restart (SIGHUP)  vlmcsd.  This  directive  can  be
              overriden using -p on the command line.


       LogFile
              Write  a  log  file.  The argument is the full pathname of a log
              file. On a unixoid OS and with Cygwin you can  use  the  special
              filename  'syslog'  to  log  to the syslog facility. This is the
              same as specifying -l on the command line.


       LogDateAndTime
              Can be TRUE or FALSE. The default is TRUE. If set to FALSE, log‐
              ging  output  does  not include date and time. This is useful if
              you log to stdout(3) which  is  redirected  to  another  logging
              mechanism that already includes date and time in its output, for
              instance systemd-journald(8). If you log to syslog(3),  LogDate‐
              AndTime  is  ignored and date and time will never be included in
              the output sent to syslog(3). Using the command line you control
              this setting with options -T0 and -T1.


       LogVerbose
              Set  this  to either TRUE or FALSE. The default is FALSE. If set
              to TRUE, more details of each activation will be logged. You use
              -v  and  -q in the command line to control this setting. LogVer‐
              bose has an effect only if you specify a log  file  or  redirect
              logging to stdout(3).


       ActivationInterval
              This  is the same as specifying -A on the command line. See vlm‐
              csd(8) for details. The default is 2 hours. Example: Activation‐
              Interval = 1h


       RenewalInterval
              This  is the same as specifying -R on the command line. See vlm‐
              csd(8) for details. The default is 7 days.  Example:  RenewalIn‐
              terval = 3d. Please note that the KMS client decides itself when
              to renew activation. Even though vlmcsd sends the renewal inter‐
              val  you specify, it is no more than some kind of recommendation
              to the client. Older KMS clients did follow  the  recommendation
              from a KMS server or emulator. Newer clients do not.


       User   Run  vlmcsd  as  another, preferrably less privileged, user. The
              argument can be a user name or a numeric user id. You must  have
              the  required  privileges  (capabilities on Linux) to change the
              security context of a process without providing any  credentials
              (a  password in most cases). On most unixoid OSses 'root' is the
              only user who has these privileges in the default configuration.
              This  setting  is not available in the native Windows version of
              vlmcsd. See -u in vlmcsd(8). This setting cannot be  changed  on
              the fly by sending SIGHUP to vlmcsd.


       Group  Run  vlmcsd  as another, preferrably less privileged, group. The
              argument can be a group name or a numeric  group  id.  You  must
              have  the  required privileges (capabilities on Linux) to change
              the security context of a process without providing any  creden‐
              tials  (a  password in most cases). On most unixoid OSses 'root'
              is the only user who has these privileges in the default config‐
              uration.  This  setting  is  not available in the native Windows
              version of vlmcsd. See -g in vlmcsd(8). This setting  cannot  be
              changed on the fly by sending SIGHUP to vlmcsd.


       Windows
              The  argument  has the form ePID [ / HwId ]. Always use ePID and
              HwId for Windows activations. If  specified,  RandomizationLevel
              for Windows activitations will be ignored.


       Office2010
              The  argument  has the form ePID [ / HwId ]. Always use ePID and
              HwId for Office 2010 activations. If  specified,  Randomization‐
              Level for Office 2010 activitations will be ignored.


       Office2013
              The  argument  has the form ePID [ / HwId ]. Always use ePID and
              HwId for Office 2013 activations. If  specified,  Randomization‐
              Level for Office 2013 activitations will be ignored.


       Office2016
              The  argument  has the form ePID [ / HwId ]. Always use ePID and
              HwId for Office 2016 activations. If  specified,  Randomization‐
              Level for Office 2016 activitations will be ignored.


VALID EPIDS
       The  ePID is currently a comment only. You can specify any string up to
       63 bytes. In Windows 7 Microsoft has blacklisted few (  <  10  )  ePIDs
       that  were  used  in KMSv5 versions of the "Ratiborus Virtual Machine".
       Microsoft has given up on blacklisting when KMS emulators  appeared  in
       the wild.

       Even if you can use "Activated by cool hacker guys" as an ePID, you may
       wish to use ePIDs that cannot be detected as non-MS ePIDs. If you don't
       know  how  these  "valid"  ePIDs look like exactly, do not use GUIDS in
       vlmcsd.ini. vlmcsd  provides  internal  mechanisms  to  generate  valid
       ePIDs.

       If you use non-ASCII characters in your ePID (you shouldn't do anyway),
       these must be in UTF-8 format. This is especially  important  when  you
       run vlmcsd on Windows or cygwin because UTF-8 is not the default encod‐
       ing for most editors.

       If you are specifying an optional HWID it follows the same syntax as in
       the  -H  option in vlmcsd(8) ecxept that you must not enclose a HWID in
       quotes even if it contains spaces.


FILES
       vlmcsd.ini(5)


AUTHOR
       vlmcsd(8) was written by crony12, Hotbird64 and vityan666. With contri‐
       butions from DougQaid.


CREDITS
       Thanks  to  CODYQX4,  deagles,  eIcn, mikmik38, nosferati87, qad, Rati‐
       borus, ...


SEE ALSO
       vlmcsd(8), vlmcsd(7), vlmcs(1), vlmcsdmulti(1)



Hotbird64                       September 2016                   VLMCSD.INI(5)
