2 Commits

Author	SHA1	Message	Date
Huy Do	f5f76160a3	feat: surface gate detail in the workflow run/resume --json payload (#2965) ... * feat: surface gate detail in the workflow run/resume --json payload A paused run was indistinguishable from any other pause in the machine-readable outcome, and the gate's prompt/options/choice never left the human-facing stream. Record each step's type in the run state's step results (one engine line) and, when the run sits at a gate, add a gate block (step_id/message/options/choice) to the payload so orchestrators can drive review gates without parsing stdout. Reference implementation for the proposal in #2964. Addresses #2964 * fix(workflow): only surface gate detail in --json when the run is paused Address review (#2965): _gate_outcome() emitted a gate block whenever current_step_id pointed at a gate step. Since RunState.current_step_id is never cleared on completion, a completed/failed run whose last step was a gate leaked stale gate detail in run/resume/status --json. Guard on status == paused. Also assert CLI success in the _run_json test helper before JSON-parsing, and add direct coverage for the suppression guard. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * fix(workflows): surface gate block on aborted runs; stabilize message Address Copilot review: - `_gate_outcome` now also surfaces the gate block when a run is `aborted` by a gate rejection (`on_reject: abort`), not only when `paused`. Abort is the only path that sets ABORTED and it leaves current_step_id on the gate, so an orchestrator can read the recorded `choice` for the stop. - Coerce `message` to a string (it may be a non-string YAML literal that GateStep only coerces for interpolation) so the JSON schema stays stable. - Tests: add a CLI-level aborted-path test, a message-coercion test, and extend the suppression test to allow `aborted`; share the run helper via `_invoke_json` to avoid duplicating the invoke boilerplate. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * test(workflows): assert clean exit in gate-abort JSON test Address Copilot review: the gate-abort test parsed stdout without first asserting the CLI exited cleanly, so an invoke failure would surface as an opaque JSON decode error. Route it through `_run_json` (which asserts exit_code == 0 before parsing) and drop the now-redundant `_invoke_json` helper — a gate abort emits the payload and returns, so the run exits 0. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * fix: use result.output in run-helper assert; document step_data shape Address Copilot review: - `_run_json` asserted with `result.stdout` in the message, but under `--json` step output is redirected off stdout — the useful diagnostics live on `result.output`. Switch the assertion message to `result.output` (the JSON parse still reads stdout), matching the other CLI tests. - `StepContext.steps` documented a 5-key entry shape; the engine now also persists `type` and `status`. Update the docstring to the canonical 7-key shape so step authors/debuggers see the real record. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * test(workflows): align gate-abort JSON test with aborted→exit-1 After rebasing onto main, a gate abort now emits the --json payload and then exits non-zero (`_run_outcome_exit_code` maps aborted → 1, from the merged exit-code work). Give `_run_json` an `expected_exit` parameter (default 0) so the abort case asserts exit 1 while the paused/completed cases stay at 0 — keeping a single shared helper rather than duplicating the invoke boilerplate. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * fix(workflows): backward-compat gate detection + normalize gate options Address Copilot review: - A run paused by an older version has no persisted step `type`, so `_gate_outcome` would never surface its gate block on resume. Add `_is_gate_step`: prefer the `type` field, but when it is absent fall back to the gate's unique output signature (`on_reject`, written only by GateStep). A record with a different known `type` is still not a gate. - Normalize `options` to a list of strings (mirroring the `message` coercion) so an unvalidated workflow with non-string options can't destabilize the JSON schema. - Tests: options coercion, type-less gate detection, and a type-less non-gate negative case. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * fix(workflows): normalize non-list gate options to a stable list[str] Address Copilot review: the prior options normalization only mapped a `list`, returning the raw value for any other shape (scalar/tuple), which contradicted the "stable list[str]" intent. Extract `_normalize_gate_options`: None stays None; list/tuple maps each element through str; any other scalar becomes a single-element list (a bare string is one option, never iterated character-by-character). The emitted schema is now always list[str] | None. Extend the options test to cover list, tuple, bare string, numeric scalar, and None. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * fix(workflows): normalize gate choice to str; portable plain-gate test Address Copilot review: - `_gate_outcome` normalized `message` and `options` but passed `choice` through as-is; an unvalidated gate can record a non-string `choice`, which contradicts the stable-schema rationale. Coerce `choice` to `str | None` (None still means "no decision yet"), consistent with the other two fields. Adds a focused choice-coercion test. - The plain (no-gate) test workflow used `run: "true"`, which fails under cmd.exe on Windows (ShellStep uses shell=True). Use the cross-platform `run: "exit 0"` (matching the exit-code suite's workflows). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> --------- Co-authored-by: Claude Fable 5 <noreply@anthropic.com>	2026-06-22 07:05:54 -05:00
Copilot	a00e679918	Add workflow engine with catalog system (#2158) ... * Initial plan * Add workflow engine with step registry, expression engine, catalog system, and CLI commands Agent-Logs-Url: https://github.com/github/spec-kit/sessions/72a7bb5d-071f-4d67-a507-7e1abae2384d Co-authored-by: mnriem <15701806+mnriem@users.noreply.github.com> * Add comprehensive tests for workflow engine (94 tests) Agent-Logs-Url: https://github.com/github/spec-kit/sessions/72a7bb5d-071f-4d67-a507-7e1abae2384d Co-authored-by: mnriem <15701806+mnriem@users.noreply.github.com> * Address review feedback: do-while condition preservation and URL scheme validation Agent-Logs-Url: https://github.com/github/spec-kit/sessions/72a7bb5d-071f-4d67-a507-7e1abae2384d Co-authored-by: mnriem <15701806+mnriem@users.noreply.github.com> * Address review feedback, add CLI dispatch, interactive gates, and docs Review comments (7/7): - Add explanatory comment to empty except block - Implement workflow catalog download with cleanup on failure - Add input type coercion for number/boolean/enum - Fix example workflow to remove non-existent output references - Fix while_loop and if_then condition defaults (string 'false' → bool False) - Fix resume step index tracking with step_offset parameter CLI dispatch: - Add build_exec_args() and dispatch_command() to IntegrationBase - Override for Claude (skills: /speckit-specify), Gemini (-m flag), Codex (codex exec), Copilot (--agent speckit.specify) - CommandStep invokes installed commands by name via integration CLI - Add PromptStep for arbitrary inline prompts (10th step type) - Stream CLI output live to terminal (no silent blocking) - Remove timeout when streaming (user can Ctrl+C) - Ctrl+C saves state as PAUSED for clean resume Interactive gates: - Gate steps prompt [1] approve [2] reject in TTY - Fall back to PAUSED in non-interactive environments - Resume re-executes the gate for interactive prompting Documentation: - workflows/README.md — user guide - workflows/ARCHITECTURE.md — internals with Mermaid diagrams - workflows/PUBLISHING.md — catalog submission guide Tests: 94 → 122 workflow tests, 1362 total (all passing) * Fix ruff lint errors: unused imports, f-string placeholders, undefined name * Address second review: registry-backed validation, shell failures, loop/fan-out execution, URL validation - VALID_STEP_TYPES now queries STEP_REGISTRY dynamically - Shell step returns FAILED on non-zero exit code - Persist workflow YAML in run directory for reliable resume - Resume loads from run copy, falls back to installed workflow - Engine iterates while/do-while loops up to max_iterations - Engine expands fan-out per item with context.item - HTTPS URL validation for catalog workflow installs (HTTP allowed for localhost) - Fix catalog merge priority docstring (lower number wins) - Fix dispatch_command docstring (no build_exec_args_for_command) - Gate on_reject=retry pauses for re-prompt on resume - Update docs to 10 step types, add prompt step to tables and README * Potential fix for pull request finding 'Empty except' Co-authored-by: Copilot Autofix powered by AI <223894421+github-code-quality[bot]@users.noreply.github.com> * Address third review: fan-out IDs, catalog guards, shell coercion, docs - Fan-out generates unique per-item step IDs and collects results - Catalog merge skips non-dict workflow entries (malformed data guard) - Shell step coerces run_cmd to str after expression evaluation - urlopen timeout=30 for catalog workflow installs - yaml.dump with sort_keys=False, allow_unicode=True for catalog configs - Document streaming timeout as intentionally unbounded (user Ctrl+C) - Document --allow-all-tools as required for non-interactive + future enhancement - Update test docstring and PUBLISHING.md to 10 step types with prompt * Validate final URL after redirects in catalog fetch urlopen follows redirects, so validate the response URL against the same HTTPS/localhost rules to prevent redirect-based downgrade attacks. * Address fourth review: filter arg eval, tags normalization, install redirect check - Filter arguments now evaluated via _evaluate_simple_expression() so default(42) returns int not string - Tags normalized: non-list/non-string values handled gracefully - Install URL redirect validation (same as catalog fetch) - Remove unused 'skipped' variable in catalog config parsing - Author 'github' → 'GitHub' in example workflow - Document nested step resume limitation (re-runs parent step) * Add explanatory comment to empty except ValueError block * Address fifth review: expression parsing, fan-out output, URL install, gate options - Move string literal parsing before operator detection in expressions so quoted strings with operators (e.g. 'a in b') are not mis-parsed - Fan-out: remove max_concurrency from persisted output, fix docstring to reflect sequential execution - workflow add: support URL sources with HTTPS/redirect validation, validate workflow ID is non-empty before writing files - Deduplicate local install logic via _validate_and_install_local() - Remove 'edit' gate option from speckit workflow (not implemented) * Add comments to empty except ValueError blocks in URL install * Address sixth review: operator precedence, fan_in cleanup, registry resilience, docs - Fix or/and operator precedence (or parsed first = lower precedence) - Restore context.fan_in after fan-in step completes - Catch JSONDecodeError in registry load for corrupted files - Replace print() with on_step_start callback (library-safe) - Gate validation warns when on_reject set but no reject option - Shell step: document shell=True security tradeoff - README: sdd-pipeline → speckit, parallel → sequential for fan-out - ARCHITECTURE.md: parallel → fan-out/fan-in in diagram * Address seventh review: string literal before pipe, type annotations, validate on install - Move string literal check above pipe filter parsing so 'a | b' works - Fix type annotations: input_values list[str] | None, run_id str | None - Run validate_workflow() before installing from local path/URL - Remove duplicate string literal check from expression parser * Address eighth review: fan-out namespaced IDs, early return, catalog validation - Fan-out per-item step IDs use _fanout_{step_id}_{base}_{idx} namespace to avoid collisions with user-defined step IDs - Early return after fan-out loop when state is paused/failed/aborted - Catalog installs parse + validate downloaded YAML before registering, using definition metadata instead of catalog entry for registry * Address ninth review: populate catalog, fix indentation, priority, README - Add speckit workflow entry to catalog.json so it's discoverable - Fix shell step output dict indentation - Catalog add_catalog priority derived from max existing + 1 - README Quick Start clarified with install + local file examples * Address tenth review: max_iterations validation, catalog config guard, version alignment - Validate max_iterations is int >= 1 in while and do-while steps - Guard add_catalog against corrupted config (non-dict/non-list) - Align speckit_version requirement to >=0.6.1 (current package version) - Fan-out template validation uses separate seen_ids set to avoid false duplication errors with user-defined step IDs * Address eleventh review: command step fails without CLI, ID mismatch warning, state persistence - Command step returns FAILED when CLI not installed (was silent COMPLETED) - Catalog install warns on workflow ID vs catalog key mismatch - Engine persists state.save() before returning on unknown step type - Update tests to expect FAILED for command steps without CLI - Integration tests use shell steps for CLI-independent execution * Address twelfth review: type annotations, version examples, streaming docs, requires - Fix workflow_search type annotations (str | None) - PUBLISHING.md: speckit_version >=0.15.0 → >=0.6.1 - Document that exit_code is captured and referenceable by later steps - Mark requires as declared-but-not-enforced (planned enhancement) - Note full stdout/stderr capture as planned enhancement * Enforce catalog key matches workflow ID (fail instead of warn) * Bundle speckit workflow: auto-install during specify init - Add workflows/speckit to pyproject.toml force-include for wheel builds - Add _locate_bundled_workflow() helper (mirrors _locate_bundled_extension) - Auto-install speckit workflow during specify init (after git extension) - Update all integration file inventory tests to expect workflow files * Address fourteenth review: prompt fails without CLI, resolved step data, fan-out normalization - PromptStep returns FAILED when CLI not installed (was silent COMPLETED) - Engine step_data prefers resolved values from step output - Fan-out normalizes output.results=[] for empty item lists - subprocess.run inherits stdout/stderr (no explicit sys.stdout) - Registry tests use issubset for extensibility * Address fifteenth review: fan_in docstring, gate defaults, validation guards, reserved prefix - FanInStep docstring: aggregate-only, no blocking semantics - FanInStep: guard output_config as dict, handle None - Gate validate: use same default options as execute - Validate inputs is dict and steps is list before iterating - Reserve _fanout_ prefix in step ID validation - PUBLISHING.md: remove unenforced checklist items, add _fanout_ note * Address sixteenth review: docs regex, fan_in try/finally, hyphenated dot-path keys - PUBLISHING.md: update ID regex docs to match implementation (single-char OK) - FanInStep: wrap expression evaluation in try/finally for context.fan_in - Expression dot-path: allow hyphens in keys before list index (e.g. run-tests[0]) * Make speckit workflow integration-agnostic, document Copilot CLI requirement - Workflow integration selectable via input (default: claude) - Each command step uses {{ inputs.integration }} instead of hardcoded copilot - Copilot docstring documents CLI requirement for workflow dispatch - Added install_url for Copilot CLI docs * Address seventeenth review: project checks, catalog robustness - Add .specify/ project check to workflow run/resume/status/search/info - remove_catalog validates config shape (dict + list) before indexing - _fetch_single_catalog validates response is a dict - _get_merged_workflows raises when all catalogs fail to fetch - add_catalog guards against non-dict catalog entries in config * Address eighteenth review: condition coercion, gate abort result, while default, cache guard, resume log - evaluate_condition treats plain 'false'/'true' strings as booleans - Gate abort returns StepResult(FAILED) instead of raising exception so step output is persisted in state for inspection - while_loop max_iterations optional (default 10), validation aligned - Catalog cache fallback catches invalid JSON gracefully - resume() appends workflow_finished log entry like execute() * Address nineteenth review: allow-all-tools opt-in, empty catalogs, abort dead code, while docstring - --allow-all-tools controlled by SPECKIT_ALLOW_ALL_TOOLS env var (default: 1) Set to 0 to disable automatic tool approval for Copilot CLI - Empty catalogs list falls back to built-in defaults (not an error) - Remove unreachable WorkflowAbortError catches from execute/resume (gate abort now returns StepResult(FAILED) instead of raising) - while_loop docstring updated: max_iterations is optional (default 10) * Address twentieth review: gate abort maps to ABORTED status, do-while max_iterations optional - Engine detects output.aborted from gate step and sets RunStatus.ABORTED (was unreachable — gate abort returned FAILED but status was always FAILED) - do-while max_iterations now optional (default 10), aligned with while_loop - do-while docstring and validation updated accordingly * Coerce default_options to dict, align bundled workflow ID regex with validator * Gate validates string options, prompt uses resolved integration, loop normalizes max_iterations * Use parentId:childId convention for nested step IDs - Fan-out per-item IDs use parentId:templateId:index (e.g. parallel:impl:0) - Reserve ':' in user step IDs (validation rejects) - Replaces _fanout_ prefix with cleaner namespacing - Expressions like {{ steps.parallel:impl:0.output.file }} work naturally * Validate workflow version is semantic versioning (X.Y.Z) * Schema version validation, strict semver, load_workflow docstring, preserve max_concurrency - Validate schema_version is '1.0' (reject unknown future schemas) - Strict semver regex: ^\d+\.\d+\.\d+$ (rejects 1.0.0beta etc.) - load_workflow docstring: 'parsed' not 'validated' - Keep max_concurrency in fan-out output (was dropped) - do_while docstring: engine re-evaluates step_config condition - ARCHITECTURE.md: document nested resume limitation * Path traversal prevention, loop step ID namespacing - RunState validates run_id is alphanumeric+hyphens (no path separators) - workflow_add validates catalog source doesn't escape workflows_dir - Loop iterations namespace nested step IDs as parentId:childId:iteration so multiple iterations don't overwrite each other in context/state --------- Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com> Co-authored-by: mnriem <15701806+mnriem@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <223894421+github-code-quality[bot]@users.noreply.github.com>	2026-04-14 10:11:56 -05:00